Hello dear Amigurumi Followers
Today we share Amigurumi Unicorn Doll Free pattern for you. As you know we share new free amigurumi pattern every day. The main crochets are gazelle, amigurumi bear, pola, crochet panda, penguin, giraffe, llama, pig, bunny, clown, lamb, bee, crochet unicorn, amigurumi doll, fox, penguin, dinosaur, crochet elephant, hippo, monkey, crochet cat, crochet dog and more …
Todays daily new amigurumi free crochet pattern is Amigurumi Unicorn Doll.
I want to give you some informations about this amigurumi free pattern ; Unicorn Doll.
You will need:
Approx 100 g size 4 yarn in outfit color and skin color
Small amount of pink yarn for the feet
Small amount of yarn for the mane
Crochet Hook in Size 3.75 or 3.5
Yarn Needle
Polyfil
10.5mm safety eyes
stitch marker
Embroidery thread for eyelashes
Abbreviations and Tips&Tricks
(Please note that gauge is not overly important here. Unless you have wide gaps in your fabric of single crochet, then go down a hook size until you achieve tight stitches.)
*Written in US Crochet Terms*
SC– single crochet
SC INC- single crochet increase (2 SC in each stitch)
INV DEC– Invisible decrease (put hook through the FRONT LOOP ONLY of two consecutive stitches [two loops on hook] Yarn over pull through both loops. [two loops on hook] Yarn over pull through two loops)
Magic Circle– Make a loop, leaving a long tail to work with. Insert hook in center of loop, yarn over and draw up a loop. Yarn over, pull through to make the first chain (this does not count as a stitch!). Continue to crochet over the loop and tail with the number of stitches called for. (If you need 6 SC, then crochet 6 SC inside the ring.) Pull the tail to close the circle.
Amigurumi Unicorn Doll Free Pattern
Always move your stitch marker to the last stitch in the round. This pattern is worked in continuous rounds. Stuff as you go.
Amigurumi Unicorn Leg One
Round 1: In a magic circle, SC 6
Round 2: SC INC in each stitch around (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Rounds 6-8: SC in each around. (30)
Round 9: INV DEC in the next 12. SC in the next 6. (18)
Round 10: SC in each around. (18)
Change from the pink to the white here.
Rounds 11-20: SC in each around. (18)
SC in the next two. Fasten off.
Amigurumi Unicorn Leg Two
Round 1: In a magic circle, SC 6
Round 2: SC INC in each stitch around (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Rounds 6-8: SC in each around. (30)
Round 9: INV DEC in the next 12. SC in the next 6. (18)
Round 10: SC in each around. (18)
Change from the pink to the white here.
Rounds 11-20: SC in each around. (18)
Round 21 (This round attaches the legs and then you will begin the body): Sc in next 12. Chain 3 and then SC in the next stitch of Leg One. Take care to crochet over the tail left over by fastening off. SC in each stitch around Leg One. When you come to the three chains, SC in each chain (a total of three.) Then SC in each stitch around Leg Two. SC in each chain back (3 stitches) to the other leg. In the last SC on the last chain place your stitch marker.
Round 22: SC around. (42)
Rounds 23-36: SC around (42)
Round 37: 4 SC, INV DEC, repeat around. (35)
Round 38: 3 SC, INV DEC, repeat around. (28)
Round 39: 2 SC, INV DEC, repeat around.(21)
Change to skin color.
Round 40: 1 SC, INV DEC, repeat around. (14)
INV DEC until you have 12 stitches on the round
Round 41: SC in each stitch around. (12)
From here we will be increasing the head. From this point I am resetting the number on the rounds. Round 42 of the body is now Round 1 of the head. It will be easy to see.
Amigurumi Unicorn Doll Head
Round 1: SC in first, SC INC in next. Repeat around. (18)
Round 2: SC in first 2, SC INC in next. Repeat around. (24)
Round 3: SC in first 3, SC INC in next. Repeat around. (30)
Round 4: SC in first 4, SC INC in next. Repeat around. (36)
Round 5: SC in first 5, SC INC in next. Repeat around. (42)
Round 6: SC in first 6, SC INC in next. Repeat around. (48)
Round 7: SC in first 7, SC INC in next. Repeat around. (54)
Round 8-18: SC in each stitch around. (54)
Place the safety eyes in between rows 13 and 14, nine stitches apart. Sew on eyelashes here, if you want. This is also a good time to place the foam roller or dowel if you are using one. Make sure to stuff the neck around the dowel as well as you can.
Round 19: SC in the first 7, INV DEC in the next. Repeat around. (48)
Round 20: SC in the first 6, INV DEC in the next. Repeat around. (42)
Round 21: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 22: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 23: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 24: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 25: SC in the first, INV DEC in the next. Repeat around. (12)
Round 26: INV DEC around. (6)
Fasten off and carefully sew the remaining hole closed. Leave a long tail to make the
nose.
Amigurumi Unicorn Doll Arms (I stuff only the hands, not the arms.)
With skin color:
Round 1: 6 SC in a magic circle.
Round 2. SC INC in each around. (12)
Round 3: SC in the first, SC INC in the next. Repeat around. (18)
Round 4-6: SC in each around. (18)
Round 7: SC in the first, INV DEC in the next. (12)
Round 8: SC in each around. (12)
Change to costume color.
Rounds 9-23: SC in each around. (12)
Fasten off and leave a long tail to sew on. I sew on between rows 37-38.
Amigurumi Unicorn Ears (make two)
Round 1: In a magic circle, 6 SC.
Round 2: SC in each around. (6)
Round 3: SC INC in each around. (12)
Round 4: SC in first, SC INC in next. Repeat around. (18)
Round 5: SC in the first 2, SC INC in next. Repeat around. (24)
Round 6: SC in the first 3, SC INC in the next. Repeat around. (30)
Rounds 7-9: SC in each around. (30)
Round 10: SC in first 3, INV DEC in next. Repeat around. (24)
Round 11: SC in first 2, INV DEC in next. Repeat around. (18)
Round 12: SC in first, INV DEC in next. Repeat around. (12)
Round 13: SC in each around.
Amigurumi Unicorn Horn
Using the gold:
Round 1: In a magic circle, 6 SC.
Round 2: SC in each around.
Round 3: SC in first, SC INC in next. Repeat around.(9)
Round 4-5: SC in each around.
Round 6: SC in first 2, SC INC in next. Repeat around. (12)
Round 7-13: SC in each around.
Fasten off and leave a long tail to sew onto the Amigurumi Unicorn head.
Amigurumi Unicorn Bangs
Chain 5. In the second chain from the hook SC in the next 3 stitches. Repeat 5 times. Pin onto the head and attach along the top lines. Make sure that you make sure the hat will cover correctly before you attach.
Side Hair
Chain 15. In the second chain from the hook SC in the next 14 stitches. Repeat 5 times. Pin it to the sides, under the hat and sew it on.
Hat (With a size bigger hook)
Round 1: SC 6 in a magic circle.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Round 7: SC in first 5, SC INC in next. Repeat around. (42)
Round 8: SC in first 6, SC INC in next. Repeat around. (48)
Round 9: SC in first 7, SC INC in next. Repeat around. (54)
Round 10-22: SC in each stitch around. (54)
Slip stitch in the next two. Fasten off and leave a long tail to sew on the head. Pull that hat on the head (it may be a snug fit but that is good!) and sew along the edge of the hat.
Unicorn Mane Hair
Chain 5. In the second chain from the hook SC in the next 3 stitches. Repeat 3 times. I made 5, each in a different color.
Then chain 20. In the second chain from the hook SC in the next 19 stitches. Repeat 5 times. I made 5, each in a different color.
After you attach the ears and horn to the top of the hat, attach the mane where you want it to be. Put the smaller pieces in the front and the longer in the back. I pin them and sew it on then tie off underneath the strands.
Tail
Chain to 20. Slip stitch in the second chain from hook and in each chain across. Fasten off leaving a tail to sew on. I made 5 in 5 different colors. Sew on the bottom. I attached it with a needle and then tied underneath the piece.
More Amigurumi Doll Ideas:
