Hello dear Amigurumi Followers
Today we share Amigurumi Plush Sloth Free Pattern for you. As you know we share new free amigurumi pattern every day. The main crochets are gazelle, amigurumi bear, pola, crochet panda, penguin, giraffe, llama, pig, bunny, clown, lamb, bee, crochet unicorn, amigurumi doll, fox, penguin, dinosaur, crochet elephant, hippo, monkey, crochet cat, crochet dog and more …
Todays daily new amigurumi free crochet pattern is Amigurumi Plush Sloth.
I want to give you some informations about this amigurumi free pattern ; Plush Sloth.
Necessary materials
• Plush yarn in the main color (Himalaya Dolfin Baby, YarnArt Dolce gray, brown) – one skein
• Beige plush yarn – a little for the head 10 gr
• Kartopu Amigurumi (or similar) color milky 025- 10 gr
• Hooks suitable for yarn
• Screw eyes (16 mm)
• Filler holofiber
• Thread, sewing needle, scissors
• A little brown and white floss or similar yarn
• Kartopu Amigurumi for eyes, nose and mouth.
• The size of the finished crochet sloth amigurumi is approximately 25 cm.
Abbreviations
MR- Magic ring
Sc- Single crochet
Ch- Chain
Inc- Increase
Dec- Decrease
Sl st- Slip stitch
Hdc- Half double crochet
Amigurumi Plush Sloth Free Pattern:
Circles under the eyes (2 parts)
Rnd 1. 4 ch, we close the ring sl st, 2 ch turning chain stitch
Rnd 2. to the central part 12 Hdc
Rnd 3. 6 sc, sl st
Cut the thread and hide.
Head
Starting with beige yarn.
Rnd 1. 6 ch, from the 2nd loop from the hook 4 sc, 3 sc in 1 loop, on the second side 3 sc, inc – 12
Rnd 2. inc, 3 sc, 3 inc, 3 sc, 2 inc – 18
Rnd 3. sc, inc, 3 sc, (sc, inc)*3, 3 sc, inc, sc, inc – 24
Rnd 4. 2 sc, inc, 4 sc, (2 sc, inc)*3, 4 sc, inc,2 sc, inc – 30
Rnd 5. 3 sc, inc, 5 sc, (3 sc, inc)*3, 5 sc, inc,3 sc, inc – 36
We change to the yarn of the main color, so that the transition is less noticeable, crochet to the side and then change the thread to the main color.
Rnd 6-9. 36 sc
To make the head oval, the reductions in the following rows should be on the sides. The beginning of the row is in the front in the middle.
Rnd 10. 3 sc, (3 sc, dec)*3, 3 sc, (3 sc, dec)*3 – 30
Rnd 11. 3 sc, (2 sc, dec)*3, 3 sc, (2 sc, dec)*3 – 24
Rnd 12. 3 sc, (sc, dec)*3, 3 sc, (sc, dec)*3 – 18
We begin to make out the muzzle, fasten circles under the eyes. See the design of the muzzle. After registration, we fill.
Rnd 13. 3 sc, 3 dec, 3 sc, 3 dec – 12
Filling up to the end
Rnd 14. 6 dec- 6
Cut the thread, tighten the hole, fasten the thread.
Making a muzzle
We insert eyes into the center of the circles under the eyes (the most part where we crocheted 6 sc is at the bottom), fasten at the level of the 3rd row, snap the eyes.
Sew circles under the eyes with a thread to match the main yarn.
We embroider a spout with a brown floss thread at the level of the second row.
At the level of 4-5 rows we embroider a mouth.
We embroider squirrels with white thread.
Body
Rnd 1. 6 sc in MR
Rnd 2. 6 inc – 12
Rnd 3. (sc, inc)*6 – 18
Rnd 4. (2 sc, inc)*6 – 24
Rnd 5. (3 sc, inc)*6 – 30
Rnd 6. (4 sc, inc)*6 – 36
Rnd 7-8. 36 sc
Rnd 9. 12 sc, 6 dec, 12 sc – 30
Rnd 10. 30 sc
Rnd 11. (3 sc, dec)*6 – 24
Rnd 12. 24 sc
Rnd 13. (2 sc, dec)*6 – 18
Rnd 14. 18 sc
We fill
Rnd 15. (sc, dec)*6 – 12
Rnd 16-17. 12 sc
Rnd 18. 6 dec -6
Cut the thread, tighten the hole.
Upper paw (2 parts)
We start with a milky semi-cotton thread.
Rnd 1. 6 sc in MR
Rnd 2. 6 sc
Rnd 3. (sc, inc)*3 – 9
Rnd 4-5. 9 sc
Rnd 6. inc, 8 sc – 10
Rnd 7-8. 10 sc
We change the thread to a plush of the main color, we crochet the first row with a crochet hook for semi-cotton yarn (No: 3).
Rnd 9. 3 sc, dec, 3 sc, dec – 8
Rnd 10-11. 8 sc
Rnd 12. inc, 3 sc, dec, 2 sc – 8
Rnd 13. 4 sc, dec, 2 sc – 7
We stuff
Rnd 14. 5 sc, dec – 6
Rnd 15. inc, 4 sc, inc – 8
Rnd 16. sc, inc, 5 sc, inc – 10
Rnd 17. 9 sc, inc – 11
Rnd 18-20. 11 sc
Rnd 21. 3 sc, dec, 4sc, dec – 9
Rnd 22. (sc, dec)*3 – 6
Cut the thread and tighten.
Lower paw (2 parts)
We start with a milky semi-cotton thread.
Rnd 1. 6 sc in MR
Rnd 2. (sc, inc)*3 – 9
Rnd 3-5. 9 sc
Rnd 6. (2 sc, inc)*3 – 9
Rnd 7-9. 12 sc
Change the thread to plush
Rnd 10. (2 sc, dec)*3 – 9
Rnd 11. 9 sc
Rnd 12. dec, 7 sc – 8
Rnd 13. dec, 6 sc – 7
Rnd 14. 7 sc
Rnd 15. inc, 1 sc, inc, 4 sc – 9
Rnd 16. (2 sc, inc)*3 – 12
Rnd 17-20. 12 sc
Rnd 21. (2 sc, dec)*3 – 9
We fill
Rnd 22. (sc, dec)*3 – 6
Cut the thread, tighten the hole.
Assembly
Sew the head to the body.
Attach the paws using a button mount (as shown in the picture) or simply sew on.
We fasten the lower paws at the level of the 5th row, the upper ones at the level of the 17th row.
More Amigurumi Sloth Ideas:
