Amigurumi Bear Crochet Free Pattern

Legend:
KA – amigurumi ring
sbn – single crochet column
pa – increase (2 loops in 1) 
decrease – decrease (2 loops together) 
(…) * n – repeat n times in brackets 
(12) – the number of loops at the end of the row

Head:

We knit from top to bottom with beige yarn: 
1 row: 6 sb in the amigurumi ring (6) 
2 row: increase rep. 6 times (12) 
3 row: (1 PRS, increase) rep. 6 times (18) 
4 row: (2 PRS, increase) rep. 6 times (24) 
5 row: (3 PRS, increase) rep. 6 times (30) 
6 row: (4 PRS, increase) rep. 6 times (36) 
7 row: (5 sc, increase) rep. 6 times (42) 
8 row: (6 PRS, increase) rep. 6 times (48) 
9 row: (7 PRS, increase) rep. 6 times (54) 
10-20 rows: 11 rows – sbn in each loop in a circle (54) 
Between the 15th and 16th rows we fix the eyes on a secure mount, insert one eye, after 10 loops from it insert the second eye and secure with washers from the inside. 
21 row: (7 PRS, decrease) rep. 6 times (48)
22 row: (6 PRS, decrease) rep. 6 times (42) 
23 row: (5 sc, decrease) rep. 6 times (36) 
Half fill the head with filler. Then add filler in the course of knitting. 
24 row: (4 PRS, decrease) rep. 6 times (30) 
25 row: (3 PRS, decrease) rep. 6 times (24) 
26 row: (2 PRS, decrease) rep. 6 times (18) 
Fasten the thread, hide the end. Tightly fill your head with filler.

Ear (2 parts):

We knit with beige yarn: 
1 row: 6 sb in the amigurumi ring (6) 
2 row: increase rep. 6 times (12) 
3 row: (1 PRS, increase) rep. 6 times (18) 
4 row: (5 sc, increase) rep. 3 times (21) 
5-7 rows: 3 rd – sbn in each loop in a circle (21) 
8 row: (5 sbn, decrease) rep. 3 times (18) 
Fasten the thread, leave the long end of the yarn for sewing. Sew ears to the head, backing off 6 rows on either side of the crown.

Muzzle:

We knit with white yarn: 
1 row: 6 sb in the amigurumi ring (6) 
2 row: increase rep. 6 times (12) 
3 row: (1 PRS, increase) rep. 6 times (18) 
4 row: (2 PRS, increase) rep. 6 times (24) 
5 row: (3 PRS, increase) rep. 6 times (30) 
6 row: sbn in each loop in a circle (30) 
Fasten the thread, leave the long end of the yarn for sewing. Sew the muzzle to the head, starting from the second row from the bottom of the head, adding a little filler. 

Embroider the nose with a dark brown cotton thread. 
Using yarn of the main beige color to decorate the face. To do this, embroider the eyelids by making small stitches under each eye. Underline the eyelids by adding another 2-3 stitches on either side of the eyes.

Body:

The legs and body are connected in one piece, we start knitting with slippers and finish on the neck. 
At the beginning of each row we make an air lifting loop which is not taken into account in knitting! 

We start with a light pink yarn of 
1 row: Dial a chain of 5 vp, from the second loop from the hook: increase, 2 sbn on one side of the chain, 4 sbn to the outer loop, turn knitting and knit 2 sbn on the other side of the chain, increase. Connecting column in the first loop of a circle. (12) 
2 row: 1 vp lifting, 2 increases, 2 sbn, 4 increases, 2 sbn, 2 increases. Connecting column in the first loop of a circle. (20) 
3 row: 1 vp lifting, 2 increases, 7 sbn, 3 increases, 7 sbn, 1 increase. Connecting column in the first loop of a circle. (26)
4th row: 1 vp lifting, knit 26 concave single crochet. Connecting column in the first loop of a circle. (26) 
By the end of this stage, your work will look as follows: 
5th row: 1 vp lifting, 7 PRS, 12 PSSN, 7 PRS. Connecting column in the first loop of a circle (26) 
6 row: 1 v.p. rise, 7 sbn, 6 decreases from PSSN, 7 sbn. Connecting column in the first loop of the circle (20) 

Change the color of the thread to beige: 
7 row: knit for the back half-loop: 6 sb, 5 decreases, 4 sb (15) 
Fill the shoe with filler, then fill as you knit. 
8 row: (3 PRS, decrease) rep. 3 times (12) 
9-11 rows: 3 rows – sbn in each loop (12) 

Change the color of yarn to purple: 
12 row: (3 sbn increase) rep. 3 times (15)
13-15 rows: 3 rows – sbn in each loop (15) 
16 row: 7 sbn (all other loops remain untied) 
Fasten the thread and cut the thread, leaving the tail of yarn about 30 cm long to be tied to the other leg. 

Tie the second leg, repeating knitting from 1 to 15 rows. 
Important! Skip the 16 row on the second leg. Do not cut the thread after completing the second leg. 
Next, connect the legs together. 
17 row: Continues from the second leg, sbn into each loop (15 loops), a chain of 5 vp Next, we knit along the first leg, starting from the place where the knitting of the first leg in the 16th row ended: 15 sbn, we make a chain of 5 vp and connect it to the second leg. 
Here you get 40 loops (15 sbn + 5 vp + 15 sbn + 5 vp)
There will be a small gap between the legs, but don’t worry, we will close it later! 
18 row: sbn in each loop (15 sbn in the leg, 5 sbn in the chain of vp) rep. 2 times (40) 
19-28 rows: 10 rows – sbn in each loop (40) 
29 row: (6 sbn, decrease) rep. 5 times (35) 
30-31 rows: 2 rows – sbn in each loop (35) To 
fill the legs and half of the body with filler. Next, we fill the body in the course of work. 
32 row: (5SBN, decrease) rep. 5 times (30) 
33-34 rows: 2 rows – sbn in each loop (30) 
35 row: (3 sbn, decrease) rep. 6 times (24) 

Sew the gap between the legs using the tail of yarn remaining from the first leg. 
36-37 rows: 2 rows – sbn in each loop (24) 
38 row: (2 sbn, decrease) rep. 6 times (18)

Change the yarn to beige color: 
39 row: knit for the back half-loop 18 sb (18) 
Fasten the thread and leave a long tail of yarn for sewing the body to the head.

Collar:


We knit a collar for the remaining front half loops of 38 rows, holding the body upside down. 
Light pink: 
2 vp lifting (1 CCH, increase from CCH) rep. 3 times, 
2 vp, connecting column, 2 vp lifting 
(1 CCH, increase from CCH) rep. 5 times, connecting column in the first loop. Fasten and cut the thread, leaving a long tail to secure the collar later.

Clasp:

Light pink color: 
Dial a chain of 15 vp, from the second loop from the hook: increase, 12 sbn, 4 sbn into the last loop, turn the knitting and knit on the other side of the chain: 12 sbn, increase in the first loop of the circle. Connecting column (32) 
Fasten and cut the thread, leaving a long tail of sewing yarn. 

Lift the collar up and fasten the strip in the center right under the collar. Sew the strip with a decorative seam using a dark pink color. 
Sew the head to the torso. Make sure your face is centered.

Hands (2 parts):

We start in beige: 
1 row: 6 sc in the amigurumi ring (6) 
2 row: increase rep. 6 times (12) 
3 row: (3 PRS, increase) rep. 3 times (15) 
4-6 rows: 3 rows – sbn in each loop (15) 
7 row: (decrease, 3 sbn) repeat 3 times (12) 
Change the thread to purple: 
8-11 rows: 4 rows – sbn each loop (12) 
Fill a hand with a filler. Add filler as you work. 
12 row: (4 PRS, decrease) rep. 2 times (10) 
13-15 rows: 3 rows – sbn in each loop (10) 
Further, the filler does not need to be added. 
16 row: (3 PRS, decrease) rep. 2 times (8) 
17-18 rows: 2 rows – sbn in each loop (8) 

Fasten the thread and leave the long end of the yarn for sewing hands to the body.
Raise the collar up and sew it directly under it with your hands. 
Now lower the collar down and lock it in place with a few stitches on the back and front. 
Sew small buttons to your pajamas and embroider a pocket with dark pink thread. 
Decorate slippers with a fringing and a bow with dark pink yarn. Sew in small stitches around the edge of the shoe, leaving the small ends of the yarn. 
Tie them with a bow. Repeat with the other shoe.

Bow:

We knit the rotary rows in dark pink. 
1 row: dial a chain of 8 vp Starting from the second loop from the hook, we knit 7 sbn (7) 
2-10 rows: 9 rows – turn, 1 VP lifting, sbn in each loop (7) 
Do not cut the thread. Tie the canvas in a circle with connecting posts, making 2 columns in the corners. 

In the center of the fabric, make a weight, fasten with several stitches in the center and attach a bow to the head.

More Amigurumi Bear Ideas:

Author: admin

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir