Amigurumi Naughty Monkey Free Pattern

Hello dear Amigurumi Followers
Today we share Amigurumi Naughty Monkey Free Pattern for you. As you know we share new free amigurumi pattern every day. The main crochets are gazelle, amigurumi bear, pola, crochet panda, penguin, giraffe, llama, pig, bunny, clown, lamb, bee, crochet unicorn, amigurumi doll, fox, penguin, dinosaur, crochet elephant, hippo, monkey, crochet cat, crochet dog and more …
Todays daily new amigurumi free crochet pattern is Amigurumi Naughty Monkey.
I want to give you some informations about this amigurumi free pattern ; Naughty Monkey.

Amigurumi Naughty Monkey Free Pattern

Materials:
1. YarnArt Jeans yarn color 03 (milk)
2. YarnArt Jeans yarn color of your choice as the main one for the monkey
3. A little black cotton thread for the eyebrows and mouth
4. A little white felt for the eyes
5. Half beads for the eyes 8 mm
6. Filler (holofiber, sintepukh)
7. Hook No. 2
8. Long needle
9. Scissors
10. Glue moment crystal
When using the specified materials, the size of the toy is 25 cm.

Legend:
sbn – single crochet
ssn – double crochet
pssn – half double crochet
ss – connecting column
pr – increase
dec – decrease

Amigurumi Naughty Monkey Free Pattern

HEAD
We start knitting with yarn of the main color.
1 row: 6 sc in the amigurumi ring (6)
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5 row: (3 sc, inc) * 6 times (30)
6 row: (4 sc, inc) * 6 times (36)
7 row: (5 sc, inc) * 6 times (42)
8 row: (6 sc , inc) * 6 times (48)
9 row: (7 sc, inc) * 6 times (54)
10 row: (8 sc, inc) * 6 times (60)
11 row: (9 sc, inc) * 6 times (66)
12 row: (10 sbn, inc) * 6 times (72)
13 – 20 row: we knit without changes 72 sbn (8 rows)
21 row: we knit for! front! loop wall 72 sc. The thread is NOT cut.
22nd row: attach a milky thread and knit 72 sbn for! back! the wall of the loop of the 20th row.
23 – 24 row: continue to knit with a milky thread, knit without changes 72 sc (2 rows)
25 row: (10 sc, dec) * 6 times (66)
26 row: (9 sc, dec) * 6 times (60)
27 row: (8 sc, dec) * 6 times (54)
28 row: (7 sc, dec) * 6 times (48)
29 row: (6 sc, dec) * 6 times (42)
30 row: (5 sb, dec) * 6 times (36)
31 row: (4 sb, dec) * 6 times (30)
We begin to fill the head with filler
32 row: (3 sb, dec) * 6 times (24)
33 row: (2 sb , dec) * 6 times (18)
34 row: (1 sc, dec) * 6 times (12)
Fill the head completely
35 row: dec * 6 times
Pull the hole with a needle, cut the thread and hide

RIM
We return to the place where we knitted with the main color 72 sc for the front walls of the loops and left the thread.
1 row: 72 sc
2 row: 5 sc, dec, 15 sc, dec, 20 sc, dec, 15 sc, dec, 7 sc, dec (67)
3 row: 4 sc, dec, 7 sc, 4 dc, 4 sc, dec, 7 sc, 4 prss, 7 prs, dec, 4 prs, 4 prss, 7 prs, dec, 7 prs (63)
4 row: 5 prs, dec, 2 prs
! Attention!
Rapport: (2 pssn, 1sn, 1 pss2n, 2 ss2n, 1 pss2n, 1 ssn, 2 pssn)
2 sc, dec, 2 sc, repeat rapport,
2 sc, dec, 2 sc, repeat rapport,
5 sc, dec, 5 sc (59)
Next 1 sc, 1 sl-st, close. Leave a long thread for sewing.

Muzzle
We knit with milky yarn.
1 row: 14 + 1 ch
2 row: in the second loop from the hook 13 sc, 3 sc in one loop, 12 sc, inc (30)
3 row: inc, 12 sc, 3 inc, 12 sc, 2 inc (36)
4 row: 1 sc, inc, 13 sb, inc, (1 sb, inc) * 2 times, 13 sb, inc, 1 sb, inc (42)
5 row: 2 sb, inc, 14 sb, inc, (2 sb, inc) * 2 times, 14 sc, inc, 2 sc, inc (48)
6 row: 3 sb, inc, 15 sb, inc, (3 sb, inc) * 2 times, 15 sb, inc, 3 sb, inc (54)
7 – 10 row: we knit without changes 54 sb (4 rows)
1 ss, close. Leave a long thread for sewing.

EARS (2 parts)
We knit with milky yarn
1 row: 6 sc in the amigurumi ring (6)
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5-6 row: we knit without changes 24 sbn (2 rows)
It is not necessary to fill the ear.
We fold the ear into the bottom. For the loops of both sides we knit 11 sc. Leave a long thread for sewing.

NOSTRILS (2 parts)
We knit with milk-colored yarn
1 row: 4 sc in the amigurumi ring. Do not connect the first and fourth sc!
2 row: ch 1, turn, 2sc, 2 sc in the last loop (5)
3 row: ch 1, turn, 3 sc, 2 sc in the last loop (6)
Leave the thread for sewing.
The nostril should be in the form of a flat triangle.

TUMMY
We knit with milky yarn
1 row: 6 sc in the amigurumi ring (6)
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5 row: 1 dc, 5 dc, 1 dc, sl-st
Leave the thread for sewing.

ASSEMBLING THE HEAD
Sew on the headband.
“I sewed the needle back behind the last row of the headband. Captured only 1 sc. I didn’t tighten it too much so that there were no waves along the edge. The places where I knitted ss2n were slightly pulled to the center. This makes it more expressive.

I put the filler in the muzzle. We arrange it as follows. The upper part of the muzzle should cover the place where we closed the loops of the head. The rest – right, left and bottom, should be in contact with the rim. We sew.
Cut out two semicircles from white felt and glue them over the muzzle. Glue half beads on top. I have them 8 mm. Glue I use “Moment Crystal”.
Now sew on the nostrils. These little triangles need to be centered on top of the muzzle. They should almost touch one of the sides and form small tunnels.
We sew the ears on the sides of the muzzle, placing them in a semicircle.
We take a black thread and embroider the eyebrows and mouth.

BODY
We knit with yarn of the main color
1 row: 6 sc in the amigurumi ring (6)
2 row: 6 inc (12)
3 row: (1 sc, inc) * 6 times (18)
4 row: (2 sc, inc) * 6 times (24)
5 row: (3 sc, inc) * 6 times (30)
6 row: (4 sc, inc) * 6 times (36)
7 row: (5 sc, inc) * 6 times (42)
8 row : (6 sbn, inc) * 6 times (48)
9 – 14 row: we knit without changes 48 sbn (6 rows)
15 row: (6 sbn, dec) * 6 times (42)
16 row: we knit without changes 42 sbn
17 row: (5 sc, dec) * 6 times (36)
18 row: knit without changes 36 sc
19 row: (4 sc, dec) * 6 times (30)
20 row: knit without changes 30 sc
We begin to fill the body with filler
21 row: (3 sc, dec) * 6 times (24)
22 row: we knit without changes 24 sc
23 row: (2 sc, dec) * 6 times (18)
24 – 25 row: we knit without changes 18 sc
1 sl-st, leave a long thread.
Fill in the rest of the body.
Sew the body to the head.
The seam should not go over the muzzle. Sew on half of the neck, add filler, sew on the rest.
Girls, the head is slightly heavier than the body, so your monkey may already start to flirt, tilting his head a little.
We sew on the belly.

TAIL
We knit with the main color of the yarn.
We fill the tail in the course of knitting. We put a little filler so that the tail is soft and bent.

1 row: 6 sc in the amigurumi ring (6)
2 row: 6 inc (12)
3 – 10 row: knit without changes 12 sc (8 rows)
11 row: dec, 10 sc (11)
12 row: knit without changes 11 sc
13 row: dec, 9 sc (10)
14 – 33 row: we knit without changes 10 sc (20 rows)
1 sl-st, leave a long thread for sewing.

HANDLES (2 parts)
We knit with milky yarn.
We fill the handles in the course of knitting. We put a little filler so that they are soft and bend.
1 row: 6 sc in the amigurumi ring (6)
2 row: inc * 6 times (12)
3 row: (2 sc, inc) * 4 times (16)
4-5 row: knit without changes 16 sc (2 rows)
6 row: 6 sc, dec, 1 sc, dec, 5 sc (14)
7 row: 14 sc (14)
8 row: 5 sc, dec, 1 sc, dec, 4 sc (12)
Change the color to the main color of the yarn monkeys
9 – 11 row: knit without changes 12 sc (3 rows)
12 row: 4 sc, dec, 1 sc, dec, 3 sc (10)
13 – 24 row: knit without changes 10 sc (12 rows)
We fold the hole in the hits , we knit 4 sc. We leave the thread.

LEGS (2 parts)
We knit with the main color of the yarn 4 + 1 ch.
1 row: 3 sc, 3 sc in one loop, 2 sc, inc (10)
2 row: inc, 2 sc, 3 inc, 2 sc, 2 inc (16)
3 row: 1 sc, inc, 3 sc, inc, ( 1 sc, inc) * 2 times, 3 sc, inc, 1 sc, inc (22)
4 row: 2 sc, inc, 4 sc, inc, (2 sc, inc) * 2 times, 4 sc, inc, 2 sbn, inc (28)
5 – 7th row: we knit without changes 28 sbn (3 rows)
8th row: 9 sbn, (dec, 2 sbn) * 2 times, dec, 9 sbn (25)
9th row: 9 sbn, ( dec, 1 sc) * 2 times, dec, 8 sc (22)
10 row: 6 sc, (dec, 1 sc) * 3 times, dec, 5 sc (18)
11 row: 18 sc
We begin to fill the leg
12 row: 8 sb, dec, 8 sb (17)
13 row: 17 sb
14 row: 8 sb, dec, 7 sb (16)
15 – 24 row: we knit without changes 16 sb (10 rows)
We fill the legs, leaving a little free space.
We fold the hole in the hits, we knit 7 sbn. Leave the thread for sewing.

ASSEMBLING THE
TOY We sew the legs at the level of the center of the belly.
We retreat 2 rows from the head and sew on the handles.
The tail will sit in the center between the legs.

More Amigurumi Monkey Ideas: