Amigurumi Doll Baby Witch Free Pattern

Hello dear Amigurumi Followers
Today we share Amigurumi Doll Baby Witch Free Pattern for you. As you know we share new free amigurumi pattern every day. The main crochets are gazelle, amigurumi bear, pola, crochet panda, penguin, giraffe, llama, pig, bunny, clown, lamb, bee, crochet unicorn, amigurumi doll, fox, penguin, dinosaur, crochet elephant, hippo, monkey, crochet cat, crochet dog and more …
Todays daily new amigurumi free crochet pattern is Amigurumi Doll Baby Witch.
I want to give you some informations about this amigurumi free pattern ; Doll Baby Witch.

This master class is designed for purl knitting. Yarn “Iris” can be replaced with “Pelican” or any other thread suitable for hook No. 1. When using the recommended materials, the height of the doll will turn out to be approximately 9 cm, in the hat – 13 cm. If you decide to knit with another, more voluminous yarn, then be prepared to change the parameters of the doll.

Amigurumi Doll Baby Witch Free Pattern

Materials and tools:
1. Yarn “Iris” (purple, beige, milky, orange)
2. Hook 1.0 mm
3. Copper wire for the frame
4. Filling (holofiber, synthetic winterizer)
5. Cardboard for insoles
6. Scissors, sewing needle
7. Glue Moment “Crystal”
8. Beads – 2 pcs. (for the eyes)
9. Several small half-beads (to imitate buttons)
10. A small piece of white satin ribbon (for a bow).

Legend:
KA – amigurumi ring
СБН – single crochet
VP – air loop
PP – loop for lifting
OPR – back rotary row
Pr – increase
U – decrease
x 3 r. – repeat 3 times

Amigurumi Doll Baby Witch Free Pattern

Hands (2 parts)
Iris yarn, color – beige.
1: 6 sc in KA
2: (pr, 1 sc) x 3 p. (9)
3-5: 9 PRS (3 rows)
6: (UB, 1 PRS) x 3 p. (6)
7-16: 6 PRS (10 rows)
Cut the thread.
We knit the second hand in the same way.
We will knit the handles in the process of knitting the body.

Ears (2 parts)
1: 4 RLS in the spacecraft
Leave a long thread for sewing.

The legs, body and head of the doll are knitted in one piece.

Legs (2 parts)
Yarn “Iris”, color – milky.
6 sc in the spacecraft;
6 pr (12);
12 PRS (3 rows);
Ub, 4 sc (we turn the work);
UB, 1 SBN, UB (3) turn the work;
Next, we knit OPR (at the beginning of each row, do not forget to do 1 pp).
3 sc x 4 p. We turn the work:
Ub, 3 sc (side), 5 sc (before), 3 sc (side) (12);
4 sc, dec, 3 sc, dec, 1 sc (10);
Insert the wire frame, add some filler.
Next, add an orange thread.
10 sc x 2 p.;
10 sc x 2 p. (dairy). Add filler;
10 sc x 2 p. (orange);
10 sc x 2 p. (dairy);
10 sc x 2 p. (orange). Add filler;
10 sc x 2 p. (dairy);
10 sc x 2 p. (orange).
We knit the second leg in the same way.

The connection of the legs.
Cut the orange thread, continue working with a milky thread.
We do 3 VP, 10 PRS on the left leg, pr, 1 PRS, pr (along the chain wall), 10 PRS along the right leg, pr, 1 PRS, pr (along the chain wall) (30)
30 PRS (3 rows)
(Kb , 4 sc) x 5 p. (25)
25 PRS (2 rows). Change the thread to beige.
25 PRS (5 rows)
We knit hands.
3 RLS, 2 RLS simultaneously on the left hand and body, 12 RLS, 2 RLS simultaneously along the right hand and body, 6 RLS (25)
3 RLS, 4 PRSs along the left hand, 12 RLS, 4 RLS along the right hand, 6 RLS ( 29)
29 RLS (2 rows)
Add filler to the body, insert the wire frame into your hands.
Ub, 1 sc, 13 dec (15)
2 sc, 3 dec, 1 sc, 3 dec (9)
6 sc, dec, 1 sc (8)
8 PRS (3 rows) – neck

Before tying the head, we will put the doll in a dress.

Dress
Yarn “Iris”, color – purple.
We collect 18 VP, we close them in a ring.
1: (2 sc, pr) x 6 p. (24)
2: (3 PRS, pr) x 6 p. (30)
3: (4 sc, pr) x 6 p. (36)
4: 7 RLS, Z VP, 5 RLS skip, 13 RLS, 3 VP, 5 RLS skip, 6 RLS (32)
5-9: 32 RLS (5 rows)
10: Pr, 5 RLS, pr, 7 RLS, pr, 7 RLS, pr, 9 RLS (36);
11-16: 36 PRS (6 rows)

Sleeves
On the armhole of the sleeves, we collect 12 RLS.
12 PRS (9 rows)

We tie the bottom of the dress, sleeves, and collar with RLS with a milk-colored thread.
Optionally, we make an imitation of buttons from half-beads and sew on a satin bow!
So, the dress is ready, we try it on a doll

Head
1: 8 pr (16)
2: ( pr , 1 SBN) x 8 r. (24)
3: (Pr, 2 SBN) x 8 p. (32)
4: (Pr, 3 SBN) x 8 p. (40)
5-14: 36 PRS (10 rows)
At the level of the 4th row we sew eyes. The distance between the eyes is approximately 8 sc.
Sew on the ears, embroider the mouth and eyebrows.
15: (Ub, 3 SBN) x 8 p. (32)
16: (Ub, 2 SBN) x 8 p. (24)
We fill the head with filler.
17: (Ub, 1 sc) x 8 p. (16)
Add filler.
18: 10 kill We
fix the thread, cut it off, hide it.

For the hairstyle, cut orange strings about 10 cm in size. Gently attach them to the head in a knotted way. Optionally, you can embroider bangs for the doll.

Hat
Yarn “Iris”, color – purple.
1: 4 sc in KA
2-3: 4 sc (2 rows)
4: (pr, 1 sc) x 2 p. (6)
5: 6 sc (2 rows)
6: (pr, 2 sc) x 2 p. (8)
7: 8 RLS
8: (Pr, 3 RLS) x 2 p. (10) 9:10
RLS
10: (Pr, 4 RLS) x 2 p. (12)
11:12 RLS
12: (Pr, 3 RLS) x 3 p. (15)
13:15 PRS;
14: (Pr, 4 PRS) x 3 p. (18) 15:18
RLS
16: (Pr, 5 RLS) x 3 p. (21) 17:21
RLS
18: (Pr, 6 RLS) x 3 p. (24) 19:24
RLS
20: (Pr, 5 RLS) x 4 p. (28) 21:28
RLS
22: (Pr, 6 RLS) x 4 p. (32)
23: (Pr, 7 SBN) x 4 p. (36)
24: (Pr, 5 SBN) x 6 p. (42)
25: (Pr, 6 PRS) x 6 p. (48)
26-27: 48 PRS (2 rows)
The hat is ready!

Shoes (2 parts)
Yarn “Iris”, color – purple.
We collect a chain of 7 VP.
1: From the second loop from the hook we knit an increase, 4 PRS, 4 PRS in 1 loop, 4 PRS, an increase (16)
2: 2 pr, 4 PRS, 4 pr, 4 PRS, 2 pr (24)
Cut the insole from the cardboard the shape of the resulting sole and glue it.
Let it dry.
3-5: 24 sc (3 rows)
6: 8 sc, dec, 1 sc, dec, 1 sc, dec, 8 sc (21) The
shoe is ready! We knit the second in the same way.